Guide · Homeowners · 3 min read · Updated 17 November 2026
How Much Does It Cost to Move a Safe in the UK?
Short answer
Moving a small home safe of up to 150kg locally typically costs £180–£350. A medium safe of 150–400kg costs £350–£750, and a heavy safe of 400–1,000kg costs £750–£1,800. Installation and anchoring starts from £150, removal and disposal from £200, and vault door or strongroom moves from £2,500 after a site survey. Weight, stairs, floor loading and the distance travelled set the final price.
Safe moving prices by weight
Safes are priced mainly by weight, because weight decides the crew size, the equipment and the vehicle. A small fire safe or home security safe can be moved by two people with a stair-climbing trolley. A graded commercial safe weighing half a tonne needs powered equipment, skates, ramps and sometimes a gantry or crane. Access is the second big factor: a safe on the ground floor with a level path to the door is far simpler than one in a basement or on the second floor of a period building.
The figures below are typical 2026 guide prices for local moves with reasonable access. Long distances, stairs and difficult sites add to the cost.
| Job | Guide price | Typical equipment |
|---|---|---|
| Small home safe up to 150kg, local | £180–£350 | Two-person crew, stair-climbing trolley, floor protection |
| Medium safe 150–400kg | £350–£750 | Powered stair climber, ramps, tail-lift vehicle |
| Heavy safe 400–1,000kg | £750–£1,800 | Skates, gantry or crane, survey first |
| Safe installation and anchoring | from £150 | Drilling and fixing with the manufacturer's anchor kit |
| Safe removal and disposal | from £200 | Steel recycled; upstairs units cost more |
| Vault door or strongroom move | from £2,500 | Quoted after survey; engineering as needed |
Why access changes the price so much
Stairs are the biggest cost driver after weight. Every step needs to be climbed safely, with the safe secured to powered equipment and the crew controlling it at all times. Spiral staircases, tight landings and narrow doorways can make a route impossible without removing doors or frames, or using an external lift instead. Floors also matter: a heavy safe concentrates a lot of weight on a small area, so crews often use spreader boards to protect floors and spread the load.
Outside, the vehicle needs to get close. Long carries across gravel drives, lawns or uneven paving slow the job and may need temporary trackway.
- Weight and dimensions of the safe
- Number of steps, and whether stairs are straight or turning
- Door widths and tight corners on the route
- Floor type and whether spreader boards are needed
- Distance from the vehicle to the safe
- Need for a gantry, crane or external lift
Installation and anchoring
Moving the safe is often only half the job. Most security safes are designed to be anchored to the floor or wall, and many insurers expect them to be fixed in line with the manufacturer's instructions. Installation and anchoring starts from £150 and involves positioning the safe, drilling through the pre-drilled anchor holes into concrete and fixing it with the supplied anchor bolts.
Timber floors and stud walls are harder to anchor into securely. In those cases, the installer may recommend a different position, a concrete plinth or a specific fixing method. Ask about this at the quote stage.
After anchoring, check the door opens and closes smoothly and the bolts throw fully. A safe that has been knocked out of level during a move can bind, and the installer should adjust its position before fixing it down for good.
Heavy safes and vault doors
Safes over 400kg usually need a site survey before a price is fixed. The surveyor checks the route, floor strength, door widths and vehicle access, and decides whether skates, a gantry or a crane is needed. Heavy safe moves cost £750–£1,800 depending on these factors.
Vault doors and strongroom equipment are a different scale of job, starting from £2,500. They can weigh several tonnes, may be built into the structure of the building and often need engineering input, lifting plans and specialist equipment. Every job is quoted individually after a survey.
Disposal of old safes
Old safes can be removed and disposed of from £200. Most of the weight is steel, which is recycled. Some older safes contain fire-resistant fill, and very old units may contain materials that need careful handling, so the crew will check before breaking anything down. If the safe is locked and the code or key is lost, it may need opening by a safe engineer before disposal, which is a separate cost.
Ask for confirmation that the steel has gone for recycling if you need a record for business purposes.
Getting an accurate quote
Give the make and model if you know it, along with the approximate size and weight. The weight is often printed in the manual or on a label inside the door. Describe the route from the safe to the street, including steps, turns and doorways at both ends, and send photos where possible. Say whether the safe needs anchoring at the new address and what the floor is made of. With this information, a specialist can confirm the crew, equipment and vehicle, and give a fixed price before the move.
Ways to keep the cost down
Choose the new position carefully before moving day. A ground-floor position on a concrete floor near the entrance is simplest to reach, safest for the building and easiest to anchor. Clear the route of furniture, rugs and obstacles in advance. Empty the safe completely, because contents add weight and can shift inside, and have the key or code ready so the door can be secured. Booking the safe move separately from a general house removal, rather than asking a removals crew to try it, also avoids damage and repeat visits.
Questions people also ask
How much does it cost to move a 300kg safe?
A 300kg safe falls into the medium category, typically costing £350–£750 for a local move. The price covers a crew with a powered stair climber, ramps and a tail-lift vehicle. Stairs, long carries or a difficult floor would push the price towards the upper end.
Does the price include anchoring the safe?
Not always. Moving and installation are often priced separately, with anchoring starting from £150. It involves drilling into concrete and fixing the safe with the manufacturer's anchor kit. Check the quote to see whether anchoring is included, especially if your insurer requires the safe to be fixed.
Why do heavy safes need a survey?
Safes over 400kg can damage floors, stairs and doorways if the route is not planned. A survey checks floor strength, the path to the vehicle and whether a gantry or crane is needed. It means the right crew and equipment arrive on the day and the price is fixed in advance.
Written and checked by the Safe and Vault Movers team. Read our editorial policy.
More guides
How Are Heavy Safes Moved? Equipment and Methods
Heavy safes are moved with mechanical aids rather than carried. Crews use powered stair climbers for stairs, skates and pallet trucks on flat floors,…
Safe Grades Explained: What EN 1143-1 Means for You
EN 1143-1 is the European standard for testing safes, strongrooms and vault doors against burglary. Safes are tested by an independent body and given…
Safe Removal and Disposal: How to Get Rid of an Old Safe
Old safes are removed by specialist crews with stair climbers or skates, taken away and recycled for their steel. Removal and disposal starts from…
How to Choose a Safe Mover: What to Check
Choose a safe mover who surveys or asks detailed questions about weight and access, uses powered stair climbers, skates and spreader boards rather…
Get a free safe and vault movers quote
Tell us what you need and we'll come back with a clear price.
Request a quote